pcs
Item description
Materials:
Precision model: Body: Aluminium anodized, Seals: NBR, standard versions: Body: Nickel-plated brass, seals: NBR/polyurethane

Media:
oiled and unoiled filtered compressed air

Function:
These valves are used to vent the cylinders quickly and enhance the cylinder speed. For this, they are screwed directly on the cylinder using the connection 2. Breathing: The air flowing through the control valve can flow continuously from connection 1 to the connection 2. Venting: When the control valve switches over to venting, 1 becomes depressurized. The valve switches to flow from 2 to 3 and the air from the cylinder can be freely vented into the open.

Warning:
Only for use in cylinders where there is sufficient end position damping (adjustable cushion, shock absorber). When using a silencer in connection 3, this must be large enough to avoid dynamic pressure.
Properties
Ver­sion Stan­dard
Thread 2 (load) G 1/2"
Thread 1 (sup­ply air) G 1/2"
Thread 3 (ex­haust air) G 1/2"
Vent­ing 1 -> 2 [l/min] 3200
Vent­ing 2 -> 3 [l/min] 7400
Re­place­ment di­aphragm SV 12 MEM­BRANE
Tem­per­a­ture range [°C] -20 to +70
Op­er­at­ing pres­sure [bar] 1 - 10
Further information on SV12
Weight 310 g / pcs
Customs duty number 84818099
RoHS compliant Yes
Documents

 
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Immediately available